Veroboard: A Comprehensive Guide to Prototyping

What is Veroboard?

Veroboard is a popular, cost-effective prototyping board used by electronic enthusiasts and professionals alike. This pre-drilled, perforated board features parallel strips of copper on one side, which make it easy to create permanent, soldered connections between electronic components.

What is Veroboard used for?

Veroboard is primarily used for designing and testing electronic circuits before transferring them to a printed circuit board (PCB) or other more permanent solutions. It is ideal for experimenting with circuit designs and making modifications, as its flexible nature allows for easy alterations.

What material is Veroboard?

Veroboard is made from a phenolic paper laminate material known as SRBP (Synthetic Resin Bonded Paper) or FR2 (Flame Resistant 2). This material is sturdy, non-conductive, and provides a stable base for electronic components.

How to use Vero board?

Using Veroboard involves the following steps:

  1. Plan your circuit layout: Design your circuit and determine the placement of components on the Veroboard.
  2. Cut the Veroboard: Measure and cut the board to fit your circuit.
  3. Place components: Insert the electronic components through the pre-drilled holes, ensuring their leads align with the copper strips.
  4. Solder components: Solder the component leads to the copper strips, creating permanent connections.
  5. Break the copper strips: Use a Veroboard cutter or a sharp knife to break the copper strips and isolate components where needed.
  6. Test your circuit: Power up your circuit and verify its functionality.

What is the cost of Vero board?

The cost of Veroboard varies depending on the size and brand. Typically, a small piece measuring 5x7cm can cost around $1, while larger boards can range from $5 to $15.

How thick is Vero board?

Veroboard is usually 1.6mm thick, which is the standard thickness for most PCBs. Some thinner options are available, but 1.6mm is the most common size for general prototyping purposes.

What is the difference between a breadboard and Vero board?

A breadboard is a solderless prototyping tool that allows users to create temporary circuits by inserting components into a grid of interconnected sockets. Veroboard, on the other hand, is a soldered prototyping board that provides a more permanent solution.

What is the difference between Vero board and Stripboard?

While both Veroboard and stripboard are used for prototyping, they differ in their copper strip patterns. Veroboard features parallel copper strips running the length of the board, whereas stripboard has a grid-like pattern of copper squares connected by thin strips. This difference makes stripboard more versatile but slightly more challenging to work with.


Veroboard is an invaluable tool for electronic enthusiasts and professionals alike. Its flexible nature and cost-effectiveness make it a popular choice for prototyping and experimenting with circuit designs. By understanding the differences between Veroboard and other prototyping options, you can make the best decision for your project needs.

MorePCB - PCB Manufacturing and Assembly Manufacturer

Still, need help? Contact Us:

Leave a Comment

Your email address will not be published. Required fields are marked *

Read More

Recommended Article

High TG PCBs What You Need to Know(djgg)

High TG PCBs: What You Need to Know

Introduction to High TG PCBs High TG PCBs are superheroes of circuit boards! They provide enhanced thermal stability and better mechanical strength, making them the

PCB Silkscreen Marking

PCB Silkscreen – Your Complete Guide

Introduction You already know that all electronic devices consist of a circuit board. PCBs, or printed circuit boards, are an integral part of today’s electronics.

Scroll to Top

Get Free Quote

 We will answer you shortly! ( Able to send attachment )





Thanks For Contacting Us!​

We’re so glad you’re here!
We will get you back soon.